www.brickfastpanel.com - updated 09/08/09
Contact Us
About BRICKFAST
For the Architect
For the Contractor
For the Do-it-Yourselfer
Finished Projects
Download Installation Instructions
Links to thin brick manufacturers
Windload Tests
Step 6. Brush brick and mortar joints with a stiff bristle brush, and wash.
Step 5. Grout joints and strike when mortar is beach sand consistency.
Step 1. Using a 4’ level, inspect your substrate and make adjustments prior to installing the panel. For exterior applications, install a starter track and moisture barrier. Be sure to properly flash above windows and doors.
Step 2. Measure 5 1/2” - 5 5/8 from the starting corner. Snap a chalk line or use a laser level to set your first panel.
Step 3. After 1st panel is fastened and level, set your corner pieces (using a straight thin brick to bridge the 2 pieces). Then fasten the corner piece. Use one fastener per square foot.
Step 4. Place a dime-size dab of recommended adhesive to each lock-on tab. Slide dove tail on to steel tabs.
Let’s Get Started - 6 Easy Steps
